Details
Titanium Rod Diameter
We are Malaysia’s leading titanium supplier and, no matter how big or small the order, we’re here to help. We supply Titanium sheet rod and wire to other countries too.
Diameter: 10 – 50mm
Grade 1
| GENERAL PROPERTIES | METRIC | ENGLISH | COMMENTS |
| PHYSICAL PROPERTIES | |||
| Density | 4.51 g/cc | 0.163 lb/in³ | |
| MECHANICAL PROPERTIES | |||
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell |
| Tensile Strength, Ultimate | 240 Mpa | 34800 psi | |
| Tensile Strength, Yield | 170-310 Mpa | 24700 – 45000psi | |
| Elongation at Break | 24% | 24% | |
| Reduction of Area | 35% | 35% | |
| Modulus Of Elasticity | 105GPa | 15200ksi | In Tension |
| Compressive Modulus | 110 Gpa | 16000 ksi | |
| Poisson’s Ration | 0.37 | 0.37 | |
| Charpy Impact | 310J | 229 ft-lb | V-notch |
| Shear Modulus | 45 Gpa | 6530 ksi | |
| ELECTRICAL PROPERTIES | |||
| Electrical Resistivity | 4.5e-005 ohm-cm | 4.5e-005 ohm-cm | |
| THERMAL PROPERTIES | |||
| Heat of Fusion | 325 J/g | 140 BTU/lb | High Purity Ti |
| CTE,linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 0 – 100°C |
| CTE,linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 0-315°C |
| CTE,linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | 0-540°C;CTE is higher perpendicular to the c-axis |
| Specific heat Capacity | 0.52 J/g-°C | 0.124 BTU/lb-°F | Heat Capacity at 540°C IS 0.67 J/g-°C |
| Thermal Conductivity | 16 W/m-K | 111 BTU-in/hr-ft²-°F | annealed |
| Melting Point | Max 1670°C | Max 3040°F | Liquidus |
| Liquidus | 1670°C | 3040°F | |
| Beta Transus | 888°C | 1630°F | |
| OPTICAL PROPERTIES | |||
| Emissivity (0-1) | 0.3 | 0.3 | High Purity Ti at 710°C |
| Reflection Coeffcient, Visible (0-1) | 0.56 | 0.56 | High Purity Ti ;visible light |
Grade 2
| GENERAL PROPERTIES | METRIC | ENGLISH | COMMENTS |
| PHYSICAL PROPERTIES | |||
| Density | 4.51 g/cc | 0.163 lb/in³ | |
| MECHANICAL PROPERTIES | |||
| Hardness,Knoop | 170 | 170 | |
| Hardness,Rockwell B | 80 | 80 | |
| Hardness,Vickers | 145 | 145 | |
| Tensile Strength,Ultimate | 344 Mpa | 49900 psi | |
| Tensile Strength,Yield | 275-410 Mpa | 39900-59500psi | |
| Elongation at Break | 20% | 20% | |
| Reduction of Area | 35% | 35% | |
| Modulus Of Elasticity | 105GPa | 15200ksi | In Tension |
| Compressive Modulus | 110 Gpa | 16000 ksi | |
| Poisson’s Ration | 0.37 | 0.37 | |
| Izod Impact | 114-171 J | 84.1 – 126 ft-lb | |
| Fatigue Strength | 300 Mpa | 43500 psi | 1E+7 cycles, Unnotched |
| Fatigue Strength | 425 Mpa | 61600 psi | 30,000 cycles, Unnotched |
| Fracture Toughness | 66 Mpa-m½ | 60.1 ksi-in½ | K(Q);annealed |
| Shear Modulus | 45 Gpa | 6530 ksi | |
| ELECTRICAL PROPERTIES | |||
| Electrical Resistivity | 5.2e-005 ohm-cm | 5.2e-005 ohm-cm | |
| THERMAL PROPERTIES | |||
| Heat of Fusion | 325 J/g | 140 BTU/lb | High Purity Ti |
| CTE,linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 0 – 100°C |
| CTE,linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 0-315°C |
| CTE,linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | 0-540°C;CTE is higher perpendicular to the c-axis |
| Specific heat Capacity | 0.523 J/g-°C | 0.125 BTU/lb-°F | Heat Capacity at 540°C IS 0.67 J/g-°C |
| Thermal Conductivity | 16 W/m-K | 114 BTU-in/hr-ft²-°F | annealed |
| Melting Point | Max 1665°C | Max 3030°F | Liquidus |
| Liquidus | 1665°C | 3030°F | |
| Beta Transus | 913°C | 1680°F | |
| OPTICAL PROPERTIES | |||
| Emissivity (0-1) | 0.3 | 0.3 | High Purity Ti at 710°C |
| Reflection Coeffcient,Visible (0-1) | 0.56 | 0.56 | High Purity Ti ; visible light |
View more about Titanium Rod Diameter on main site